Name: Compact variable-frequency drive 0,75kW 230V (1 phase) input 230V (3 phase) output
Brand: Fluxcon
SKU: FLC150 0R7G1Z
Price: 141.90 EUR
Availability: InStock

Compact variable-frequency drive 0,75kW 230V (1 phase) input 230V (3 phase) output

€ 141,⁹⁰€ 117,27 (ex. VAT)

Op voorraad (35 stuks)

Description

0.75 kW Compact Variable Frequency Drive – Fluxcon FLC150

The Fluxcon FLC150 0.75 kW Compact Variable Frequency Drive is designed for simple and reliable control of 3-phase asynchronous AC motors. This version operates with single-phase power input / 3-phase motor output. Thanks to its compact design and functional simplicity, this 0.75 kW compact VFD is particularly suitable for applications where space saving, ease of setup, and operational reliability are key requirements.

The FLC150 is controlled using V/F control (Volt/Frequency ratio) with slip compensation. Operation is possible via digital inputs, a potentiometer, and the integrated display. This allows the drive to be commissioned quickly and easily, without complex parameter settings.

Applications

The Fluxcon FLC150 0.75 kW Compact Variable Frequency Drive is widely used in applications including:

Compressors
Fans
Pumps
Conveyor belts and conveyor systems
General machine building

Installation and Ease of Use

The simplicity of this compact variable frequency drive translates into high operational reliability and robust performance. Its compact housing and DIN rail mounting preparation make the FLC150 especially suitable for installation in control cabinets and machine panels.

EMC and Industrial Reliability

The Fluxcon FLC150 comes standard with a built-in EMC filter. In addition, a special heavy-duty coating on the electrical components provides protection against dust, moisture, chemical exposure, and vibration. The drive is designed for minimal EMC emissions and complies with European Directive 2002/95/EC (RoHS).

Additional information

Weight	1,3 kg
Dimensions	72 × 185,5 × 146 mm
Frequency range	0-400Hz
Efficiency	97,5%
Power	0,75
Digital inputs	Both 2-wire (SNK) and 3-wire (SRC) control methods are possible.
Analog input	1x, both 4-20mA or 0-10V
Motor current protection	Based on I^2 * t, 150% current for 60 seconds and 200% current for 3 seconds.
Over voltage protection	The controller will automatically shut down if the voltage reaches or exceeds the specs.
under voltage protection	the inverter will shut down when reaching under voltage
Environmental requirements	Up to a maximum of 100 meters above sea level, 0-95% humidity, non-condensing, -10 to 40 degrees Celsius, not suitable for explosive, corrosive, or dusty environments. Maximum impact: 15g, maximum vibration: 1g, 5-200Hz.
switching frequency of the PWM	2 up to 16kHz. The power rating of the controller is based on a switching frequency of 4kHz. When operating at higher switching frequencies, the frequency controller may deliver less current to the motor. This reduction in current output can result in a decrease in audible noise generated by the frequency controller itself. However, it's important to note that the trade-off for reduced noise is a potential decrease in motor torque or power output.
Motor control	V/F control without encoder feedback with slip compensation and Vector Control without encoder feedback
Acceleration / decelleration	both adjustable in a range of 0,1s up to 600s
Afmetingen W/L/A/B/E/d/H	72/138/127/61/62/5/123.5
Voltage	230V (1phase)