Compact variable frequency drive 1,5kW 230V (1 phase) input 3x230V output

HomeCompact Variable Frequency DriveCompact variable frequency drive 1,5kW 230V (1 phase) input 3x230V output

Compact variable frequency drive 1,5kW 230V (1 phase) input 3x230V output

 113,00

7 in stock

Compare
SKU: FLC150 1R5G1Z Category:

Description

Compact Variable Frequency Drive (VFD)

The compact variable freuency drive is suitable for several applications where only power and torque are needed (no position / servo applications. Typical applications for this variable frequency drive (VFD) are compressors, fans, pumps, conveyors, hoisting applications, mixers, etc.
The compact single-phase frequency controller is powered by a single-phase 220-240Vac and provides 220-240Vac output to the electric motor. As a result, it is suitable for asynchronous AC motors / three-phase motors / induction motors. The control method is based on V/F (Voltage Frequency ratio) and slip compensation or with Vector Control. Control can be achieved using digital inputs, a potentiometer, and operation of the display.

The simplicity of this compact frequency controller translates into ease of configuration and robustness/reliability. Additionally, the compact design and preparation for DIN rail mounting make this frequency controller easily integrable in a panel or control cabinet.

The compact frequency inverter is equipped with a built-in EMC filter.

Special heavy-duty coating of the electrical components provides protection against dust, moisture, chemical exposure, and vibrations. The compact frequency controller is designed with the aim of minimizing EMC (Electromagnetic Compatibility) and complies with the European Directive 2002/95/EC, Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment.

Additional information

Weight 1,8 kg
Dimensions 100 × 174 × 147 mm
Frequency range

0-400Hz

Efficiency

97,5%

Power

Digital inputs

Both 2-wire (SNK) and 3-wire (SRC) control methods are possible.

Analoge input

1x, both 4-20mA or 0-10V

Motor current protection

Based on I^2 * t, 150% current for 60 seconds and 200% current for 3 seconds.

Over voltage protection

The controller will automatically shut down if the voltage reaches or exceeds the specs.

under voltage protection

the inverter will shut down when reaching under voltage

Environmental requirements

elevations of up to 1000 meters above sea level
a humidity level ranging from 0% to 95% without condensation
-10 up to +40 degrees Celsius (°C)
not suitable for use in explosive, corrosive, or dusty environments.
maximum impact: 15g
maximum vibration: 1g, 5-200Hz

switching frequency of the PWM

2 up to 16kHz. The power rating of the controller is based on a switching frequency of 4kHz. When operating at higher switching frequencies, the frequency controller may deliver less current to the motor. This reduction in current output can result in a decrease in audible noise generated by the frequency controller itself. However, it's important to note that the trade-off for reduced noise is a potential decrease in motor torque or power output.

Motor control

V/F control without encoder feedback with slip compensation and Vector Control without encoder feedback

Acceleration / decelleration

both adjustable in a range of 0,1s up to 600s